An hour and a half was spent drilling the left wing. The rear ribs, spar tip, and root ribs were all drilled into place.

Next is the slat placement template. I need to stop by the metal shop in the morning to get some aluminum plate ( t=.125, 80mm x 150mm )

There are some things the every good workshop should have... like an iPod. Seriously, having every CD you own in something in the equivalent volume of a CD case is perfect for keeping in the shop.

In other good news: http://www.can-zacaviation.com/floats/floats.htm

Project Status:
Wings: 11.5h ( 1h, 1h, 0.5h, 2.5h, 4h, 1h, 1.5h )
Flaperons: ( DONE! ) 23.5 hours spent ( 3h, 1h, 1h, 1h, 1.5h, 3h, 6h, 3h, 4h, 1h )
Paint Design: 2 hours spent ( 1h, 1h )
Elevator DONE!: ~31.5 hours spent ( 3h, 1.5h, 3h, .5h, 3.5h, 2h, 4h, 1.5h, 2h, 4.5h, 1h, 6h )
Horizontal Stabilizer DONE!: ~28 hours spent, 3 pieces replaced ( 3h, 2h, 2h, 2h, .5h, 1.5h, 3.5h, 1.5h, 5, 4.5, 2h, .5h )
Rudder DONE!, minus horn : ~16 hours spent, ( ~8h, ~8h )
-----------------------
Total Done: ~113 hours