We got the bottom stabilizer skin corrected and riveted today. We used several clamps to make sure the piece was flat and without any twist.

Four and half hours were spent on the correction, de-burring and corrosion protection along with cutting the holes in the skin for the two mounting brackets.







Project Status:
Horizontal Stabilizer: 25.5 hours spent, 3 pieces borked ( 3h, 2h, 2h, 2h, .5h, 1.5h, 3.5h, 1.5h, 5, 4.5 )
Rudder Done, minus horn : ~16 hours spent, ( ~8h, ~8h )
Workshop Done: ~8 hours